How to improve the smooth processing of waterjet cutter
It may encounter many unexpected problems when processing with waterjet cutting machine,and it is time-consuming and laborious to solve them for inexperienced people. If mastering some skills, you can make the waterjet cutter processing more smooth, but also give full play to its value.
Actually, ordinary water can be used in the waterjet cutter system,, as long as the water is softened before entering the supercharger through inlet water filter of pump, in order to purify the water and become "unsaturated" water, for the effect and water knife cutting themselves which is beneficial to both the cutting effect and the waterjet cutter itself.
When cutting materials of different thickness, the waterjet cutter should be equipped with different cutting heads., the test proved that when cutting materials of less than 2.5 thickness, the output of production is not high by using the medium or large cutting head. If desired, you can use small parameter combination and consider using multi-head cutter, to increase output of production.
The waterjet cutting have strict rules on the size of the cutting gas seam, in order to avoid cutting seam gas is larger than 0.5 mm, the surface of the water cutter is rough when cutting the lower ; It can be done by keeping the sheets neatly putting together as they are stacked.
Underwater cutting can be considered in order to reduce the surface atomization, because underwater cutting can reduce the atomization of the surface or upper edge caused by the cutting process of abrasive water cutter, and greatly reduces the cutting noise, and make working environment more neat and orderly at the same time.
If you can use different mesh abrasive for different work, and you can consider adding a small or large sand bucket, so that we can make the whole work procedure more compact and high efficiency.